Support

Support Options

Submit a Support Ticket

 

See also

No results found.

Published on

Abstract

This learning object includes the 2-d PDF drawings for the design of the Mini Wave Flume. For the 3D (Solid works) drawings please see (http://nees.org/resources/7471). Using these drawings a 16ft by18 inch by 6 inch flume and accompanying wave maker and beach can be constructed. The mini-flume is typically constructed from 3/4 inch Plexiglas, while the beach and the wave maker housing use 1/2 inch Plexiglas. Most wave maker parts can be ordered from an industrial supply company like McMaster-Carr, but the wave board and a few other parts will need to be machined. The cost of building a mini-wave flume is dependent on the cost of Plexiglas, but is typically between $5000-$10,000. The flume is portable when built in two pieces so it can be carried in the back of a cargo van or light truck. The flume can be used in the Tsunami Lego challenge (http://nees.org/resources/7533) along with demonstrating both wind and tsunami type waves. A Lego base plate will need to be added to the flat part of the beach to use this for the Tsunami Lego Challenge.

Cite this work

Researchers should cite this work as follows:

  • Alicia Lynn Lyman-Holt (2014), "Mini-flume design drawings (PDF version)," http://nees.org/resources/7458.

    BibTex | EndNote

Tags