Support

Support Options

Submit a Support Ticket

 
You are here: Home » Tags » Shake Table Testing » All Categories

Tags: Shake Table Testing

All Categories (1-19 of 19)

  1. San Diego Earthquake Tests Show Risks Inside Buildings

    18 Mar 2013 | Notes | Contributor(s): NEES Media Communications, Marti LaChance

    KPBS TV San Diego | March 1, 2013 Television coverage. Story covers NEES@San Diego shake tests studying non-structural systems.  See attached audio clip.

    http://nees.org/resources/5810

  2. Nov 12 2012

    capstone experimentation in the NEES Grand Challenge Project on the Seismic Response of Nonstructural Systems

    The capstone experimentation in the NEES Grand Challenge Project on the Seismic Response of Nonstructural Systems will begin in November 2012, using a two-story test bed frame with tunable dynamic...

    http://nees.org/events/details/165

  3. NEES research at UC San Diego tests seismic resiliency and fire

    01 Nov 2012 | Notes | Contributor(s): NEES Media Communications, Marti LaChance

    Nov. 1, 2012 Video features UCSD and NEES research. See YouTube footage below. Find more video under Documents and Attachments.

    http://nees.org/resources/5822

  4. Model-Based Framework for Real-Time Dynamic Structural Performance Evaluation

    02 Oct 2012 | Publications | Contributor(s): Brian Phillips, Billie F. Spencer

    Extreme dynamic events continue to demonstrate the fragility of civil infrastructure worldwide. Over the years, design codes and computational tools have come to reflect an improved understanding...

    http://nees.org/resources/5023

  5. Stability of Rocking Structures

    18 May 2011 | Publications | Contributor(s): Kari Nasi

    Previous studies on the stability of rocking structures subjected to earthquake motions have focused on the development of numerical tools to estimate dynamic response. These tools have not been...

    http://nees.org/resources/2950

  6. State of the Art of Shaking Table Tests of Wood Buildings in Japan

    04 Feb 2011 | Multimedia | Contributor(s): NEES EOT

    In the last decade, many shaking table tests of wood buildings including collapse tests have been conducted in Japan. The purposes, results, conclusions and video clips of these full-scale tests...

    http://nees.org/resources/2553

  7. Behavior of Ten-Story Reinforced Concrete Walls Subjected to Earthquake Motions by Jose Dario Aristizabal-Ochoa

    27 Sep 2010 | Publications | Contributor(s): Mete Sozen

    The overall objective of this work was to investigate the response of multi-story reinforced concrete structures resisting earthquake forces primarily through "cantilever" rather than frame...

    http://nees.org/resources/949

  8. CCEER-07-04: Experimental Evaluation of Performance of Conventional Bridge Systems

    31 Jul 2010 | Publications | Contributor(s): Robert Nelson, Mehdi Saiidi

    As part of a multi-university research project utilizing the Network for Earthquake Engineering Simulation (NEES), a quarter-scale 110 ft (33.5 m) long asymmetric conventional reinforced concrete...

    http://nees.org/resources/541

  9. NW-01: Seismic Testing of a Full-Scale Two-Story Light-Frame Wood Building: NEESWood Benchmark Test

    31 Jul 2010 | Publications | Contributor(s): Ioannis Christovasilis, Andre Filiatrault, Assawin Wanitkorkul

    This report discusses the benchmark shake table testing program on a full-scale two-story woodframe townhouse building conducted within the NEESWood Project. The test building represents the...

    http://nees.org/resources/551

  10. CCEER-06-02: Large-Scale Experimental and Analytical Seismic Studies of a Two-Span Reinforced Concrete Bridge System

    31 Jul 2010 | Publications | Contributor(s): Nathan Johnson, Mehdi Saiidi, David Sanders

    A quarter-scale, 67 ft (20.5 m) long asymmetric reinforced concrete bridge model with two-spans supported on three, two-column piers was tested using the shake table system at the University of...

    http://nees.org/resources/539