Support

Support Options

Submit a Support Ticket

 

NEES Project Warehouse

144 DOF Dynamic Measurement from a 50' Full Scale Highway Sign Support Truss in Intact and Damaged Conditions
No reviews have been created for this project. Review This Project

To compare experiments, please select at most four experiments from the experiment list below.

Sort By:   

  Experiment-1: Dynamic Testing of a Full Scale Highway Truss: Vertical Electrodynamic White Noise Shaker Excitation
Dates: May 18, 2011 - July 26, 2011
Description: The truss was excited in the vertical direction with band-limited white noise to simulate ambient excitation in the field. The generated white noise, amplified using an amplifier is imposed on the truss using the electro-dynamic shaker (VG-100 from Vibration...
Facility: Purdue University at West Lafayette, IN, United States


  Experiment-2: Dynamic Testing of a Full Scale Highway Truss: Hammer Excitation (location 10, direction Y)
Dates: April 23, 2011 - July 26, 2011
Description: The truss was excited with hammer excitation to simulate impact test excitation. The modal sledge hammer (PCB 086D50) with softer red tip is used. The hammer hit location for this test was at node 10 in the vertical Y direction. For each of the test...
Facility: Purdue University at West Lafayette, IN, United States


  Experiment-3: Dynamic Testing of a Full Scale Highway Truss: Hammer Excitation (location 10, direction Z)
Dates: April 23, 2011 - July 26, 2011
Description: The truss was excited with hammer excitation to simulate impact test excitation. The modal sledge hammer (PCB 086D50) with softer red tip is used. The hammer hit location for this test was at node 10 in the Z direction. For each of the test configurations...
Facility: Purdue University at West Lafayette, IN, United States


  Experiment-4: Dynamic Testing of a Full Scale Highway Truss: Hammer Excitation (location 33, direction Y)
Dates: June 13, 2011 - June 30, 2011
Description: The truss was excited with hammer excitation to simulate impact test excitation. The modal sledge hammer (PCB 086D50) with softer red tip is used. The hammer hit location for this test was at node 33 in the vertical Y direction. For each of the test...
Facility: Purdue University at West Lafayette, IN, United States


  Experiment-5: Dynamic Testing of a Full Scale Highway Truss: Hammer Excitation (location 33, direction Z)
Dates: July 01, 2011 - July 13, 2011
Description: The truss was excited with hammer excitation to simulate impact test excitation. The modal sledge hammer (PCB 086D50) with softer red tip is used. The hammer hit location for this test was at node 33 in the Z direction. For each of the test configurations...
Facility: Purdue University at West Lafayette, IN, United States


  Experiment-6: Wireless Sensors for Dynamic Testing of a Full Scale Highway Truss: Vertical Electrodynamic White Noise Shaker Excitation
Dates: May 18, 2011 - July 26, 2011
Description: The truss was excited in the vertical direction with band-limited white noise to simulate ambient excitation in the field. The generated white noise, amplified using an amplifier is imposed on the truss using the electro-dynamic shaker (VG-100 from Vibration...
Facility: Purdue University at West Lafayette, IN, United States
Start Prev 1 Next End
Display Num Results 1 - 6 of 6