Venue Stampede is now available for Batchsubmit.

Support

Support Options

Submit a Support Ticket

 

NEES Project Warehouse

SAC Steel Project - Task 7.03 - T-Stubs
No reviews have been created for this project. Review This Project

To compare experiments, please select at most four experiments from the experiment list below.

Sort By:   

  Experiment-2: Clip Angle Tests (CA)
Dates: June 28, 1998 - August 31, 1999
Description: A total of 10 clip angles were tested individually under cyclic and monotonic loads. The component tests consisted of clip angles cut from 2 angle sizes. Within each of these different series, parameters such as bolt grade, diameter, gage, and spacing...
Facility: Georgia Institute of Technology, GA, United States


  Experiment-4: Series A T-Stub Tests (TA) - Cut from a W16 x 100
Dates: June 28, 1998 - August 31, 1999
Description: A total of 48 T-stubs were tested individually under cyclic and monotonic loads. The component tests consisted of T-stubs cut from 4 different W-sections and divided into four series labeled A through D. Within each of these different series, parameters...
Facility: Georgia Institute of Technology, GA, United States


  Experiment-5: Full Scale Beam Column Tests (FS)
Dates: June 28, 1998 - August 31, 1999
Description: This phase consisted of a series of 6 full scale tests of single sided beam-column sub-assemblages that was used to validate the component test results. ...
Facility: Georgia Institute of Technology, GA, United States


  Experiment-6: Series B T-Stub Tests (TB) - Cut from a W21 x 93
Dates: June 28, 1998 - August 31, 1999
Description: A total of 48 T-stubs were tested individually under cyclic and monotonic loads. The component tests consisted of T-stubs cut from 4 different W-sections and divided into four series labeled A through D. Within each of these different series, parameters...
Facility: Georgia Institute of Technology, GA, United States


  Experiment-7: Series C T-Stub Tests (TC) - Cut from a W33 x 169
Dates: June 28, 1998 - August 31, 1999
Description: A total of 48 T-stubs were tested individually under cyclic and monotonic loads. The component tests consisted of T-stubs cut from 4 different W-sections and divided into four series labeled A through D. Within each of these different series, parameters...
Facility: Georgia Institute of Technology, GA, United States


  Experiment-8: Series D T-Stub Tests (TD) - Cut from a W16 x 45
Dates: June 28, 1998 - August 31, 1999
Description: A total of 48 T-stubs were tested individually under cyclic and monotonic loads. The component tests consisted of T-stubs cut from 4 different W-sections and divided into four series labeled A through D. Within each of these different series, parameters...
Facility: Georgia Institute of Technology, GA, United States
Start Prev 1 Next End
Display Num Results 1 - 6 of 6