NEES.org will be intermittently unavailable Saturday, January 3, for scheduled maintenance. All tool sessions will be expired. We apologize for any inconvenience that may occur.

Support

Support Options

Submit a Support Ticket

 

NEES Project Warehouse

Seismic Performance Assessment in Dense Urban Environments
No reviews have been created for this project. Review This Project

To compare experiments, please select at most four experiments from the experiment list below.

Sort By:   

  Experiment-1: Test-0: Ground Motion Calibration
Dates: February 16, 2009 - March 11, 2009
Description: Test-0 was performed in order to calibrate the centrifuge shaker to apply the desired ground motions. The results are summarized in the Mason et al. paper available under Experiment-1 -> Documentation.
Facility: California Polytechnic State University, San Luis Obispo, CA, United States
State University of New York at Buffalo, NY, United States
University of California, Berkeley, CA, United States
University of California, Davis, CA, United States
University of California, San Diego, CA, United States


  Experiment-2: Test-1: Two Isolated Structures on Dense, Dry Sand
Dates: July 13, 2009 - August 14, 2009
Description: Two moment-resisting frames, a one-story model with shallow spread footings and a three-story model with a one-story basement, are shaken independently of the other?s influence. The goal of Test-1 is to identify the SFSI response of these two highly...
Facility: University of California, Davis, CA, United States


  Experiment-3: Test-2: Two Adjacent Structures on Dense, Dry Sand (in-Plane SSSI)
Dates: November 02, 2009 - December 11, 2009
Description: Two moment-resisting frames, a one-story model with shallow spread footings and a three-story model with a one-story basement, are placed directly adjacent to each other. The goal of Test-1 is to identify the effects of in-plane SSSI on the SFSI response...
Facility: University of California, Davis, CA, United States


  Experiment-4: Test-3: Three structures on Dense, Dry Sand (in-Plane SSSI)
Dates: June 09, 2010 - July 30, 2010
Description: Two identical moment-resisting frame structures are used in this experiment. These structures represent three-story steel buildings in the prototype scale. One of these structures is isolated from other structures (the baseline case) and the other is...
Facility: University of California, Davis, CA, United States


  Experiment-5: Test-4: Five Structures on Dense, Dry Sand (anti-Plane SSSI and iSSSI+aSSSI Superposition)
Dates: April 18, 2011 - June 21, 2011
Description: Using the same two model structures as during Test-3 (Experiment-4), both anti-plane structure-soil-structure interaction and the superposition of anti-plane and in-plane SSSI were investigated. Ultimately, 5 centrifuge spins were performed. During Spin...
Facility: University of California, Davis, CA, United States


  Experiment-6: Test-5: Seven Elastic Model Structures on a Layered, Saturated Soil Profile.
Dates: January 03, 2012 - March 23, 2012
Description: This experiment consisted of seven elastic model structures on a layered, saturated, soil profile. The experiment was divided into four quadrants with the following layout in each quadrant: 1) NW Quadrant - Isolated Type A model structure; 2) NE Quadrant...
Facility: University of California, Davis, CA, United States


  Experiment-7: Test-6: Six Elastic Model Structures on a Layered, Saturated Soil Profile.
Dates: April 08, 2013 - July 11, 2013
Description: Six elastic model structures on a layered, saturated soil profile were subjected to four ground motions to study the interaction of adjacent structures on liquefiable ground. This experiment builds on Test-5 by varying the spacing between adjacent structures...
Facility: University of California, Davis, CA, United States
Start Prev 1 Next End
Display Num Results 1 - 7 of 7