Nees.org will be unavailable Tuesday September 2th from 7am-12pm EST for scheduled maintenance. Tool sessions will be expired. We apologize for any inconvenience that may occur.

Support

Support Options

Submit a Support Ticket

 

NEES Project Warehouse

Performance-Based Design of New Masonry:NCA&T
No reviews have been created for this project. Review This Project

To compare experiments, please select at most four experiments from the experiment list below.

Sort By:   

  Experiment-1: NCATW1- In-Plane Quasi-Static tests
Dates: October 01, 2006 - September 30, 2009
Description: 4 foot wall specimen. Corrugated at 16 in. each way (SDC D). This satisfies current requirements. 2” Cavity. Serpentine tie, 8 d nail. More infromation is given in summary document.
Facility: University of Texas at Austin, TX, United States
Typical 4 ft wall configuration

 Launch

1 Interactive Files
view data


  Experiment-2: NCATW2- In-Plane Quasi-Static tests
Dates: October 01, 2006 - September 30, 2009
Description: 8 foot wall specimen with opening. Corrugated at 16 in. each way (SDC D). This satisfies current requirements. 2” Cavity. Serpentine tie, 8 d nail. More information is given in summary document
Facility: University of Texas at Austin, TX, United States
Typical configuration

 Launch

1 Interactive Files
view data


  Experiment-3: NCATW3- In-Plane Quasi-Static tests
Dates: October 01, 2006 - September 30, 2009
Description: 4 foot wall specimen with opening. Rigid 16 ga, at 16 in. horizontally and 24 in. vertically with joint reinforcement (SDC E). This represents a current West Coast solution. #10 Screw at bend. 1 “ Cavity
Facility: University of Texas at Austin, TX, United States
Typical 4 ft wall configuration

 Launch

1 Interactive Files
view data


  Experiment-4: NCATW4- In-Plane Quasi-Static tests
Dates: October 01, 2006 - September 30, 2009
Description: 8 foot wall specimen with opening. Rigid 16 ga, at 16 in. horizontally and 24 in. vertically with joint reinforcement (SDC E). This represents a current West Coast solution. #10 Screw at bend. 1 “ Cavity
Facility: University of Texas at Austin, TX, United States
Gypsum panel failure

 Launch

1 Interactive Files
view data


  Experiment-5: NCATW5- Out-of-Plane Quasi-Static test
Dates: October 01, 2006 - September 30, 2009
Description: 4 foot wall specimen. Corrugated at 16 in. each way (SDC D). This satisfies current requirements. 2” Cavity. Serpentine tie, 8 d nail. See additional details in summary document.
Facility: University of Texas at Austin, TX, United States
Typical configuration

 Launch

1 Interactive Files
view data


  Experiment-6: NCATW6- Out-of-Plane Quasi-Static test
Dates: October 01, 2006 - September 30, 2009
Description: 4 foot wall specimen. Corrugated at 16 in. each way with joint reinforcement, mechanically attached (SDC E). 2” Cavity .This satisfies current requirements. Straight Tie, 8d nail See additional details in summary document.
Facility: University of Texas at Austin, TX, United States
Typical configuration

 Launch

1 Interactive Files
view data


  Experiment-7: NCATW8- Out-of-Plane Quasi-Static test
Dates: October 01, 2006 - September 30, 2009
Description: 4 foot wall specimen. Rigid 16 ga, at 16 in. horizontally and 24 in. vertically with joint reinforcement (SDC E). This represents a current West Coast solution. #10 Screw at bend. 1 “ Cavity See additional details in summary document.
Facility: University of Texas at Austin, TX, United States
Typical configuration

 Launch

1 Interactive Files
view data


  Experiment-8: NCATW7- Out-of-Plane Quasi-Static test
Dates: October 01, 2006 - September 30, 2009
Description: 4 foot wall specimen. Corrugated at 16 in. horizontally and 8 in. vertically. This represents an upgraded east-coast solution. Serpentine Tie, 8 d nail, 2” cavity. See additional details in summary document.
Facility: University of Texas at Austin, TX, United States
Typical configuration

 Launch

1 Interactive Files
view data
Start Prev 1 Next End
Display Num Results 1 - 8 of 8