Nees.org will be unavailable Tuesday September 2th from 7am-12pm EST for scheduled maintenance. Tool sessions will be expired. We apologize for any inconvenience that may occur.

Support

Support Options

Submit a Support Ticket

 

NEES Project Warehouse

Controlled Rocking of Steel-Framed Buildings
(1 User Review)

To compare experiments, please select at most four experiments from the experiment list below.

Sort By:   

  Experiment-2: Steel Slit Fuse Test
Dates: November 16, 2006 - May 20, 2007
Description: Eleven steel shear plates with openings were tested to investigate their behavior under cyclic loading. Two types of steel shear plates were studied, the slit fuse with narrow slits that divide the plate into rectangular links, and the butterfly fuse...
Facility: University of Illinois at Urbana-Champaign, IL, United States
Stanford University, CA, United States
Butterfly steel shear fuse

 Launch

11 Interactive Files
view data


  Experiment-3: Half Scale Cyclic and Hybrid Simulation Tests
Dates: August 04, 2008 - March 11, 2009
Description: A prototype three-story building was designed using controlled rocking frames assuming an arbitrary site in California and R=8. The test setup represents an approximately half-scale version of the prototype frames. The Loading and Boundary Condition...
Facility: University of Illinois at Urbana-Champaign, IL, United States
Stanford University, CA, United States


  Experiment-4: Shake Table Test
Dates: August 06, 2009 - August 24, 2009
Description: Shaking table tests of two-thirds of full-scale three-story steel braced rocking frame. The basic rocking frame configuration was tested with five different energy dissipating fuse types to various levels of shaking intensity.
Facility: University of Illinois at Urbana-Champaign, IL, United States
Stanford University, CA, United States
Hyogo Earthquake Engineering Research Center (E-Defense), Miki, Japan

 Launch

4 Interactive Files
view data
Start Prev 1 Next End
Display Num Results 1 - 3 of 3