Support

Support Options

Submit a Support Ticket

 

NEES Project Warehouse

Impact Forces from Tsunami-Driven Debris
No reviews have been created for this project. Review This Project

To compare experiments, please select at most four experiments from the experiment list below.

Sort By:   

  Experiment-52: OSU: In-Air Test, Aluminum Box, Long, Waterproof, X = 36, W = 230
Dates: August 08, 2012 - August 08, 2012
Description: In-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell type, and contact location. These tests allow us to compare against the full...
Facility: Oregon State University, OR, United States


  Experiment-53: OSU: In-Air Test, Aluminum Box, Long, Waterproof, X = 41, W = 230
Dates: August 08, 2012 - August 08, 2012
Description: In-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell type, and contact location. These tests allow us to compare against the full...
Facility: Oregon State University, OR, United States


  Experiment-54: OSU: In-Air Test, Aluminum Box, Long, Waterproof, X = 46, W = 230
Dates: August 08, 2012 - August 08, 2012
Description: In-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell type, and contact location. These tests allow us to compare against the full...
Facility: Oregon State University, OR, United States


  Experiment-55: OSU: In-Air Test, Aluminum Box, Long, Waterproof, X = 51, W = 230
Dates: August 08, 2012 - August 08, 2012
Description: In-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell type, and contact location. These tests allow us to compare against the full...
Facility: Oregon State University, OR, United States


  Experiment-57: OSU: In-Air Height Test LU-Waterproof, Aluminum Box, H = 7.1 cm
Dates: August 10, 2012 - August 10, 2012
Description: In-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell type, and contact location. These tests allow us to compare against the full...
Facility: Oregon State University, OR, United States


  Experiment-58: OSU: In-Air Height Test LU-Waterproof, Aluminum Box, H = 11.5 cm
Dates: August 10, 2012 - August 10, 2012
Description: In-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell type, and contact location. These tests allow us to compare against the full...
Facility: Oregon State University, OR, United States


  Experiment-59: OSU: In-AirTest Sshape-Round, Aluminum Box
Dates: August 10, 2012 - August 13, 2012
Description: In-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell type, and contact location. These tests allow us to compare against the full...
Facility: Oregon State University, OR, United States


  Experiment-60: OSU: In-Air Height Test Sshape-Standard, Aluminum Box
Dates: August 13, 2012 - August 13, 2012
Description: In-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell type, and contact location. These tests allow us to compare against the full...
Facility: Oregon State University, OR, United States


  Experiment-61: OSU: 1-D Hydraulic Experiment, Aluminum, Water depth = 249.6 cm
Dates: August 15, 2012 - August 20, 2012
Description: Longitudinal hydraulic experiment. The aluminum specimen was placed in the wave flume 3-4 meters upstream of the column inside of guide wires. An error function was used to generate the wave that would propagate through the flume and drive the specimen...
Facility: Oregon State University, OR, United States


  Experiment-62: OSU: 1-D Hydraulic Experiment, Aluminum, Water depth = 257.2 cm
Dates: August 20, 2012 - September 05, 2012
Description: Longitudinal hydraulic experiment. The aluminum specimen was placed in the wave flume 3-4 meters upstream of the column inside of guide wires. An error function was used to generate the wave that would propagate through the flume and drive the specimen...
Facility: Oregon State University, OR, United States


  Experiment-63: OSU: 1-D Hydraulic Experiment, Aluminum, NS = 110.7 lbs, Water depth = 257.2 cm
Dates: August 22, 2012 - August 23, 2012
Description: Longitudinal hydraulic experiment. The aluminum specimen was placed in the wave flume 3-4 meters upstream of the column inside of guide wires. An error function was used to generate the wave that would propagate through the flume and drive the specimen...
Facility: Oregon State University, OR, United States


  Experiment-64: OSU: 1-D Hydraulic Experiment, Aluminum, Water depth = 266.4 cm
Dates: August 24, 2012 - September 18, 2012
Description: Longitudinal hydraulic experiment. The aluminum specimen was placed in the wave flume 3-4 meters upstream of the column inside of guide wires. An error function was used to generate the wave that would propagate through the flume and drive the specimen...
Facility: Oregon State University, OR, United States


  Experiment-65: OSU: 1-D Hydraulic Experiment, Aluminum, NS = 110.7 lbs, Water depth = 266.4 cm
Dates: August 27, 2012 - September 04, 2012
Description: Longitudinal hydraulic experiment. The aluminum specimen was placed in the wave flume 3-4 meters upstream of the column inside of guide wires. An error function was used to generate the wave that would propagate through the flume and drive the specimen...
Facility: Oregon State University, OR, United States


  Experiment-66: OSU: 1-D Hydraulic Experiment, Aluminum, NS = 219.2 lbs, Water depth = 266.4 cm
Dates: August 29, 2012 - August 31, 2012
Description: Longitudinal hydraulic experiment. The aluminum specimen was placed in the wave flume 3-4 meters upstream of the column inside of guide wires. An error function was used to generate the wave that would propagate through the flume and drive the specimen...
Facility: Oregon State University, OR, United States


  Experiment-67: OSU: 1-D Hydraulic Experiment, Plain, Water depth = 257.2 cm
Dates: September 06, 2012 - September 07, 2012
Description: Experiments were run using the same conditions as the longitudinal hydraulic experiments but without the specimen. Seeding material was added to the flume for these ...
Facility: Oregon State University, OR, United States


  Experiment-68: OSU: 1-D Hydraulic Experiment, Plain, Water depth = 266.4 cm
Dates: September 07, 2012 - September 07, 2012
Description: Experiments were run using the same conditions as the longitudinal hydraulic experiments but without the specimen. Seeding material was added to the flume for these ...
Facility: Oregon State University, OR, United States


  Experiment-69: OSU: 1-D Hydraulic Experiment, Plain, Water depth = 249.6 cm
Dates: September 07, 2012 - September 10, 2012
Description: The video footage from these trials is used to determine the surface velocity of each wave condition used in the hydraulic debris impact experiments. These experiments are conducted with seeding material in the wave flume. Seeding material gives the...
Facility: Oregon State University, OR, United States


  Experiment-70: OSU: In-Air Height Test LU-Waterproof, Aluminum Box, Slow
Dates: September 10, 2012 - September 12, 2012
Description: In-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell type, and contact location. The purpose of these tests was to provide a basis...
Facility: Oregon State University, OR, United States


  Experiment-71: OSU: In-Air Height Test LU-Waterproof, Aluminum Box, Pitch
Dates: September 12, 2012 - September 12, 2012
Description: n-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell ...
Facility: Oregon State University, OR, United States


  Experiment-72: OSU: In-Air Test LU-Waterproof, Acrylic Box
Dates: September 12, 2012 - September 13, 2012
Description: In-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell ...
Facility: Oregon State University, OR, United States


  Experiment-73: OSU: In-Air Test LU-Waterproof, Aluminum Box, Broadside
Dates: September 13, 2012 - September 13, 2012
Description: In-air tests were performed on the 1:5 scale aluminum and acrylic shipping containers. The primary variables examined were the pullback distance, non-structural mass, load cell type, and contact location. The purpose of these tests was to provide a basis...
Facility: Oregon State University, OR, United States


  Experiment-74: OSU: 1-D Hydraulic Experiment, Acrylic, Water depth = 249.6 cm
Dates: September 14, 2012 - September 17, 2012
Description: Longitudinal hydraulic experiment. The acrylic specimen was placed in the wave flume 3-4 meters upstream of the column inside of guide wires. An error function was used to generate the wave that would propagate through the flume and drive the specimen...
Facility: Oregon State University, OR, United States


  Experiment-75: OSU: 1-D Hydraulic Experiment, Acrylic, Water depth = 257.2 cm
Dates: September 17, 2012 - September 18, 2012
Description: Longitudinal hydraulic experiment. The acrylic specimen was placed in the wave flume 3-4 meters upstream of the column inside of guide wires. An error function was used to generate the wave that would propagate through the flume and drive the specimen...
Facility: Oregon State University, OR, United States


  Experiment-76: OSU: 1-D Hydraulic Experiment, Acrylic, Water depth = 266.4 cm
Dates: September 18, 2012 - September 18, 2012
Description: Longitudinal hydraulic experiment. The acrylic specimen was placed in the wave flume 3-4 meters upstream of the column inside of guide wires. An error function was used to generate the wave that would propagate through the flume and drive the specimen...
Facility: Oregon State University, OR, United States


  Experiment-77: OSU: Broadside Hydraulic Experiment, Aluminum Specimen, Water Depth = 266.4 cm
Dates: September 19, 2012 - September 20, 2012
Description: Transverse hydraulic experiment. The aluminum specimen was placed in the wave flume 3 meters upstream of the column inside of guide wires. An error function was used to generate the wave that would propagate through the flume and drive the specimen into...
Facility: Oregon State University, OR, United States
Display Num Results 51 - 75 of 78