You are here: Home » Tags » 10NCEE » All Categories

Tags: 10NCEE

All Categories (61-80 of 778)

  1. Analysis of Bridge Performance subjected to Lateral Spreading in the 2010 Chile Earthquake

    15 May 2014 | Publications | Contributor(s): Christian Ledezma, Scott Ashford, Kengo Kato, Daniel Gonzalez Paiz

    Analysis of Bridge Performance subjected to Lateral Spreading in the 2010 Chile Earthquake Several bridge structures were damaged as a result of liquefaction-induced lateral spreading in the 2010...

    https://nees.org/resources/12573

  2. Analysis of Dynamical Systems With Path-Dependent Nonlinearities Using MATLAB ODE Solvers

    15 May 2014 | Publications | Contributor(s): Farzad Nikfar, Dimitrios Konstantinidis

    Solving Nonlinear Dynamical Systems with MATLAB ODE Solvers Using MATLAB’s Ordinary Differential Equation (ODE) Solvers to solve initial value problems (IVP) is very common among researches and...

    https://nees.org/resources/11515

  3. Analytical Evaluation of In-Ground Plastic-Hinge Length and Depth for Piles in Marine Oil Terminals

    15 May 2014 | Publications | Contributor(s): Rakesh Goel

    Analytical Evaluation of In-Ground Plastic-Hinge Length and Depth for Piles in Marine Oil Terminals Rakesh Goel This investigation evaluated the current recommendations for plastic-hinge length...

    https://nees.org/resources/11219

  4. Analytical Investigation on Seismic Performance of a High-Strength Self-Compacting Concrete Beam-Column Joint

    15 May 2014 | Publications | Contributor(s): Mohammad Soleymani Ashtiani, Rajesh P. Dhakal, Allan N. Scott

    Experimental and Analytical Investigations on Seismic Performance of High-Strength Self-Compacting Concrete Beam-Column Joints Due to its potentially beneficial properties, there has been an...

    https://nees.org/resources/11551

  5. Analytical Modeling Framework for Seismic Risk Assessment of Unreinforced Masonry Structures

    15 May 2014 | Publications | Contributor(s): Andrew O'Donnell, Yahya Kurama, Alexandros Taflanidis

    Seismic Vulnerability of Unreinforced Masonry Buildings Past earthquakes have demonstrated that unreinforced masonry (URM) structures are much more susceptible to failure than any other type of...

    https://nees.org/resources/11695

  6. Analytical simulation of shake-table responses of a 1:5 scale 9-story RC piloti-type residential building model

    15 May 2014 | Publications | Contributor(s): Han Seon Lee, Kyung Ran Hwang, Hye In Lee

    Analytical simulation of shake-table responses of a 1:5 scale 9-story RC piloti-type residential building model This paper presents the results of analytical simulation of shake-table responses of...

    https://nees.org/resources/12243

  7. Analytical Study of Shear Slotted Bolted Connection in Moment Resisting Frames

    15 May 2014 | Publications | Contributor(s): Mohammad Taghi Nikoukalam, Kiarash Mohtasham Dolatshahi, Seyed Rasoul Mirghaderi

    Analytical Modeling of Shear Slotted Bolted Connection (SSBC) in Moment Resisting Frames Slotted Bolted Connections (SBCs) and Rotational Slotted Bolted Connections (RSBCs) are two types of...

    https://nees.org/resources/12249

  8. Analytical Study on the Seismic Performance of A RC Building with Structural Wall during the May 19, 2011 Simav, Turkey Earthquake

    15 May 2014 | Publications | Contributor(s): Onur TUNABOYU, Ozgur AVSAR

    Influence of Structural Walls on the Seismic Response of RC Buildings during Kütahya-Simav Earthquake in Turkey RC buildings having adequate amount of structural walls with a proper layout, are...

    https://nees.org/resources/12325

  9. Applicability of the Ground Motion Prediction Equations to the 2011 Tohoku earthquake, M9.0, Japan

    15 May 2014 | Publications | Contributor(s): Susumu Ohno

    Applicability of the Ground Motion Prediction Equations to the 2011 Tohoku earthquake, M9.0, Japan The 2011 Tohoku earthquake is the first great (magnitude of 9 or larger) earthquake in the world...

    https://nees.org/resources/11469

  10. Application of a Collapse Capacity Methodology to Moment Resisting Frames with High Strength Materials

    15 May 2014 | Publications | Contributor(s): Birhanu Bishaw, Luis Ibarra

    Evaluating Collapse Capacity of Moment Resisting Frames That Use High Strength Fiber Reinforced Concrete This study evaluates the collapse capacity of moment resisting frames that use high...

    https://nees.org/resources/11433

  11. Application of Confined Masonry in a Major Project in India

    15 May 2014 | Publications | Contributor(s): Sudhir Jain, Dhiman Basu, Indrajit Ghosh, Durgesh Rai, Svetlana Brzev, Laksh Bhargava

    Application of Confined Masonry in a Major Project in India In many developing countries such as India, significant number of deaths during earthquakes is caused by poor performance of...

    https://nees.org/resources/12283

  12. Application of discrete element modeling for simulation of cyclic direct simple shear response of granular materials

    15 May 2014 | Publications | Contributor(s): Antone Dabeet, Dharma Wijewickreme, Peter Byrne

    Application of DEM for simulation of the Cyclic Direct Simple Shear Response of Granular Materials The Discrete Element Method (DEM) has been increasingly used to simulate and study the...

    https://nees.org/resources/12141

  13. Application of Horizontal-to-Vertical (H/V) Spectral Ratios for Both Microtremors and Earthquake Motions Based on the Diffuse Field Theory

    15 May 2014 | Publications | Contributor(s): Hiroshi Kawase, Shinichi Matsushima, Fumiaki Nagashima, Francisco Sánchez-Sesma

    New Application Method of Horizontal-to-Vertical (H/V) Spectral Ratios for Both Microtremors and Earthquake Motions Based on the Diffuse Field Theory Horizontal-to-vertical spectral ratios (HVRs)...

    https://nees.org/resources/11863

  14. Application of Hybrid Simulation for Evaluating Design of a Rocking Steel Frame System

    15 May 2014 | Publications | Contributor(s): Matthew Eatherton, Jerome Hajjar, Gregory Deierlein

    Application of Hybrid Simulation for Evaluating Design of a Rocking Steel Frame System Self-centering rocking steel frames have been developed through prior research and subjected to a range of...

    https://nees.org/resources/11591

  15. Application of Laser Scanning to Structural Testing in Earthquake Engineering, Field Survey, and Structural Assessment of an Earthquake Aftermath

    15 May 2014 | Publications | Contributor(s): Shakhzod Takhirov, Khalid Mosalam

    Application of Laser Scanning to Structural Testing in Earthquake Engineering, Field Survey, and Structural Assessment of an Earthquake Aftermath The capabilities and advantages of laser scanners...

    https://nees.org/resources/12219

  16. Application of Multiple Digital Image Correlation Sensors in Earthquake Testing

    15 May 2014 | Publications | Contributor(s): Michael McGinnis, Steve Barbachyn, Yahya Kurama

    Application of Multiple 3-D Digital Image Correlation Sensors in Earthquake Testing Over the past several decades, large-scale structural testing has become ever more expensive, and researchers...

    https://nees.org/resources/11531

  17. APPLICATION OF SIMPLIFIED PROCEDURES IN THE SEISMIC ASSESSMENT AND PERFORMANCE-BASED DESIGN OF CONTINUOUS LONG-SPAN RC BRIDGES

    15 May 2014 | Publications | Contributor(s): Marco Escamilla, A Gustavo Ayala

    APPLICATION OF SIMPLIFIED PROCEDURES IN THE SEISMIC ASSESSMENT AND PERFORMANCE BASED DESIGN OF CONTINUOUS LONG-SPAN RC BRIDGES In recent years, there is an increasing interest in the use of...

    https://nees.org/resources/12545

  18. APPLICATIONS OF CALCULATION CHANNEL FUNCTION IN HYBRID SIMULATION

    15 May 2014 | Publications | Contributor(s): Shawn You

    Sensor Noise Elimination Using Calculation Channel Function in Hybrid Simulation Shawn You Hybrid simulation in earthquake simulation has become more and more popular. In this approach, the...

    https://nees.org/resources/11043

  19. APPLICATIONS OF SEISMIC DAMPERS TO SPECIAL MOMENT FRAMES

    15 May 2014 | Publications | Contributor(s): Amir Gilani, H Kit Miyamoto

    Seismic dampers, enhanced perfromanced, superior long term perfromance and reduced collpase risk H Kit Miyamoto, Amir Gilani The application of seismic protection devices such as dampers has...

    https://nees.org/resources/11063

  20. Applying Control Theories and ABM to Improve Resilience-Based Design of Systems

    15 May 2014 | Publications | Contributor(s): Gian Paolo Cimellaro, Hwasung Roh, Yuri Koh

    Applying structural control strategies to improve resilience-based design of systems Resilient design necessitates a paradigm shift with respect to the methods historically used in system design. ...

    https://nees.org/resources/12549