You are here: Home » Tags » concrete » All Categories

Tags: concrete

All Categories (1-20 of 23)

  1. Assessment of Punching Shear Vulnerability of Slab-Column Connections with Shear Stud Reinforcement

    12 Jan 2011 | Poster | Contributor(s): Alex DaCosta, Eric Michael Matzke, Gustavo Parra-Montesinos, Carol Shield

    https://nees.org/resources/2309

  2. Behavior and Design of Concrete-Filled Beam-Columns webinar

    21 May 2013 | Multimedia | Contributor(s): Roberto Leon, Jerome Hajjar, Larry Griffis, NEES EOT

    "Behavior and Design of Concrete-Filled Beam-Columns" is the next in the Research to Practice Webinar Series co-produced by the Network for Earthquake Engineering Simulation (NEES) and the...

    https://nees.org/resources/6326

  3. Nov 04 2011

    E-Defense Four-Story RC PT Buildings Blind Prediction Contest 2011

    PEER and NEES are sponsoring a blind prediction contest for two, full-scale, four-story buildings tested simultaneously on the NIED E-Defense shake table in December 2010. The two buildings are...

    https://nees.org/events/details/73

  4. Effect of Longitudinal Reinforcement Ratio on the Failure Mechanism of R/C Columns Most Vulnerable to Collapse

    24 Aug 2010 | Publications | Contributor(s): Adolfo Matamoros

    Models to calculate the drift ratio at axial load failure of reinforced concrete columns such as that proposed by Elwood and Moehle indicate that the drift ratio at axial load failure is primarily...

    https://nees.org/resources/814

  5. Hybrid Simulation of the Seismic Response of Squat Reinforced Concrete Shear Walls

    04 Jan 2011 | Poster | Contributor(s): Catherine Whyte

    This project will investigate the earthquake response of large-scale reinforced concrete walls through hybrid simulation tests conducted at the nees@Berkeley laboratory site.  Squat...

    https://nees.org/resources/2084

  6. Lessons from Chile: Impacts on Earthquake Engineering of Concrete Buildings in the U.S. webinar

    18 Jul 2011 | Multimedia

    "Lessons from Chile" is the second in a series of Research to Practice Webinars co-produced by the Network for Earthquake Engineering (NEES) and the Earthquake Engineering Research Institute...

    https://nees.org/resources/3192

  7. Nanotechnology of Concrete Webinar

    04 Feb 2011 | Multimedia | Contributor(s): NEES EOT

    Nanotechnology for cement-based materials Webinar by Paulo J.M. Monteiro, Department of Civil and Environmental Engineering

    https://nees.org/resources/2515

  8. Oct 17 2012

    NEES / EERI Research to Practice Webinar

    NEES / EERI Research to Practice Webinar:"Precast Concrete Walls for Seismic-Resistant Design: from PRESSS Research to PreWEC""From PRESSS Research to PreWEC" is the eighth in the Research to...

    https://nees.org/events/details/143

  9. NEEShub Databases, Quick access to concrete data

    04 Apr 2013 | Publications | Contributor(s): JoAnn Browning, Santiago Pujol, Rudi Eigenmann, Julio Ramirez

    NEES researchers describe the benefits of using the NEEShub cyberinfrastructure for conducting earthquake engineering studies and in particular, studies related to the behavior of concrete. The...

    https://nees.org/resources/5768

  10. NEEShub Databases, Quick access to concrete data

    09 Apr 2013 | Active Documents | Contributor(s): JoAnn Browning, Santiago Pujol, Rudi EIgenmann, Julio Ramirez

    Concrete International | April 2013 Earthquake engineers describe the advantages of using the NEES cyberinfrastructure for conducting research, especially for understanding the behaviors of...

    https://nees.org/resources/5793

  11. Non ductile versus ductile concrete columns

    15 Jun 2010 | Multimedia | Contributor(s): Sean Brophy

    UCLA and seismic construction News footage shows an experiment comparing ductile and non-ductile supporting columns undergoing compression loading. (partial segment) UCLA - John Wallace

    https://nees.org/resources/289

  12. PERFORMANCE-BASED DESIGN OF REINFORCED CONCRETE SQUAT WALLS

    12 Jul 2011 | Poster | Contributor(s): Sean Brophy

      The goal of this project is to determine performance-based design equations for reinforced concrete squat walls – walls with an aspect (height to length) ratio less than or equal to...

    https://nees.org/resources/3135

  13. Plastic Hinging Behavior of Reinforced Concrete Bridge Columns

    11 May 2011 | Publications | Contributor(s): Zeynep Firat

    The location of inelastic deformations in reinforced concrete bridge columns has been examined to simulate the nonlinear response of bridge columns and estimate the ultimate displacement capacity....

    https://nees.org/resources/2896

  14. Precast Concrete Walls for Seismic-Resistant Design: From PRESSS Research to PreWEC webinar

    15 Oct 2012 | Multimedia

    "From PRESSS Research to PreWEC" is the eighth in the Research to Practice Webinar Series co-produced by the Network for Earthquake Engineering Simulation (NEES) and the Earthquake...

    https://nees.org/resources/5075

  15. Apr 23 2012

    Research to Practice Webinar - Seismic Design Methodology for Precast Concrete Floor Diaphragms

    "Seismic Design Methodology for Precast Concrete Floor Diaphragms " is the fifth in a series of Research to Practice Webinars co-produced by the Network for Earthquake Engineering Simulation...

    https://nees.org/events/details/130

  16. May 29 2013

    Research to Practice Webinar: Behavior and Design of Concrete-Filled Beam-Columns

    Presented by: Roberto T. Leon, Virginia Tech; Jerome F. Hajjar, Northeastern University; Larry Griffis, Walter P. MooreSupporting documents are available at the following link:...

    https://nees.org/events/details/190

  17. Apr 08 2014

    SEAONC April Meeting: Older Concrete Building Seismic Risk

    Nonductile concrete buildings pose one of the greatest seismic safety problems in the world. While engineers generally recognize that proactive steps are needed to address the risk posed by these...

    https://nees.org/events/details/266

  18. Seismic Design Methodology for Precast Concrete Floor Diaphragms webinar

    23 Apr 2012 | Multimedia

    "Seismic Design Methodology for Precast Concrete Floor Diaphragms" was the fifth in a series of Research to Practice Webinars co-produced by the Network for Earthquake Engineering Simulation...

    https://nees.org/resources/4414

  19. Simulation of the Seismic Response of Low Aspect Ratio Concrete Walls

    04 Jan 2011 | Poster | Contributor(s): Josh Rocks

    Recent studies have shown that predictive equations used in North America for the peak shear strength of low aspect ratio walls are biased and that the scatter in the ratios of measured to...

    https://nees.org/resources/2071

  20. Stability of Rocking Structures

    18 May 2011 | Publications | Contributor(s): Kari Nasi

    Previous studies on the stability of rocking structures subjected to earthquake motions have focused on the development of numerical tools to estimate dynamic response. These tools have not been...

    https://nees.org/resources/2950