Support Options

Submit a Support Ticket

You are here: Home » Tags » tool:uisimcor » All Categories

Tags: tool:uisimcor

All Categories (1-15 of 15)

  1. How can I connect to UI-SIMCOR and give displacement to and take forces from ABAQUS ?

    Closed | Responses: 0

    Dear Oh-Sung Kwon:

    I am a student to UI-SIMCOR. The current version available for download is v2.8, but the example/user manual available is that for v2.6 which has examples that...

  2. Which of the material classes are available in OpenSees solver?

    Closed | Responses: 1

    I would like to know which of the material classes are available in the modified Opensees version used with SimCor.

    As a matter of fact,  I came across a problem when...

  3. Failed convergence

    Closed | Responses: 0

    Hello, I’ve a problem with a set of 12 nonlinear 2D fiber OpenSEES model. 3 degrees of freedom over 2...

  4. Solver parameters

    Closed | Responses: 1

    In the case of OpenSEES as finite element code, how can I set the solver paramenters for the application of...

  5. Static load in the case with more than one DOF

    Closed | Responses: 1

    With regard to the example 8.2 of the UI-SIMCOR manual title “Inelastic Cantilever Column with initial loading” the static load is applied within the Opensees tcl file on a dummy...

  6. OpenSEES – Concrete01 material model

    Closed | Responses: 1

    Does UI-Simcor support the OpenSEES Concrete01 material model? Thanls a lot for the support. Giuseppe

  7. Memory effect

    Closed | Responses: 1

    At each time-step, is the restoring force from OpenSEES, through UI-SIMCOR, dependent to the previous...

  8. Nonlinear fiber models

    Closed | Responses: 1

    there is a limit in the computational time for the solution of a generic OpenSEES model? I’m trying...

  9. Step definition for Abaqus modules

    Closed | Responses: 1

    The .INP files for the Abaqus modules do not run without step definitions. The step definitions(from example manual) have been defined as:

    *STEP, INC=100000,...

  10. “NICA.exe has stopped working”

    Closed | Responses: 1

    Hi, I keep getting this error when I try to connect Abaqus modules using SIMCOR. I was able to run a 1DOF cantilever problem though. For others I get this error. I am using abq6112.bat as the...

  11. How to connect OpenSees/Abaqus modules running on different computer?

    Open | Responses: 1


    I ran almost all the simcor examples using opensees given in the manual. I am easily able to run 2 or more

  12. Example Manual for UI-SIMCOR v2.6

    Open | Responses: 1


    I am very new to UI-SIMCOR. The current version available for download is v2.8 but the example/user manual available is that for v2.6 which has examples that don’t...

  13. Error while trying to Initialize-SimCor

    Closed | Responses: 1

    Dear Dr.Kwon,

    I am sorry if my question is trivial but I am not very familiar with communication protocols, so I was wondering if you could help me again. I am trying to install

  14. Displ and Rot values for the preliminary test-SimCor

    Closed | Responses: 1

    Dear all,

    I realized that the selection of the displacement and rotation values used for the preliminary test for each module are very important (modes differ if I use different values)....

  15. Run the SDOF_Concrete example using OpenSees and SimCor

    Closed | Responses: 1

    Dear all, I’m trying to run the SimCor examples that are provided but I have some difficulties. I run...