NEEShub services are beginning to be phased out. Please begin using DesignSafe (https://www.designsafe-ci.org). Please submit a support ticket (https://www.designsafe-ci.org/help/tickets/) if you need any assistance.

Support

Support Options

Submit a Support Ticket

 

NEES Project Warehouse

Earthquake Response and Rehabilitation of Critical Lifelines
No reviews have been created for this project. Review This Project

To compare experiments, please select at most four experiments from the experiment list below.

Sort By:   

  Experiment-1: Cornell - Pipe/Liner Characterization
Dates: January 21, 2011 - April 18, 2011
Description: A series of simple tests were performed on standard ductile iron pipe and IMain liner specimens provided by the Los Angeles Department of Water & Power (LADWP) and InsituForm Technologies, respectively. These included a ring compression test on a section...
Facility: Cornell University, NY, United States


  Experiment-2: Cornell - Axial Push Tests on Unlined Ductile Iron Pipe
Dates: May 16, 2012 - May 24, 2012
Description: This report presents the results of push tests performed on unlined ductile iron pipes connected with bell-spigot joints in order to study the axial frictional resistance of the pipes when pushed through soil. Six different tests were performed using...
Facility: Cornell University, NY, United States


  Experiment-3: Cornell - Unlined Pressurized Ductile Iron Test with Soil
Dates: June 12, 2012 - June 12, 2012
Description: This report presents the results of a large-scale tension test on unlined ductile iron (DI) pipe connected with bell-spigot joints. The primary purpose of this test was to provide a baseline response from a section of unlined pipe so that comparisons...
Facility: Cornell University, NY, United States


  Experiment-4: Cornell - IMain Lined Ductile Iron Pipe Test, Pipe Centered
Dates: July 03, 2012 - July 03, 2012
Description: This report presents the results of a pull test performed on an Insituform IMain lined ductile iron pipe connected with a bell-spigot joint in order to study the axial frictional resistance of the pipes when put in tension within soil. The straight section...
Facility: Cornell University, NY, United States


  Experiment-5: Cornell - IMain Lined Ductile Iron Pipe Test, Joint Centered
Dates: July 25, 2012 - July 25, 2012
Description: This report presents the results of a pull test performed on an Insituform IMain lined ductile iron pipe connected with a bell-spigot joint in order to study the axial frictional resistance of the pipes when put in tension within soil. The bell-spigot...
Facility: Cornell University, NY, United States


  Experiment-6: Cornell - IMain Lined Ductile Iron Pipe Test, Load Rate Sensitivity Test
Dates: September 19, 2012 - November 21, 2012
Description: This report presents the results of a large-scale axial pull tests on lined ductile iron (DI) pipe connected with bell-spigot joints. The primary purpose of these tests was to determine a) if there was preferential failure when pulling on the bell end...
Facility: Cornell University, NY, United States


  Experiment-7: Buffalo - Dynamic Tests of Double Joints with Rinaldi Ground Motions
Dates: December 21, 2011 to Present
Description: The double joint dynamic tests using the Rinaldi ground motions were performed on the test specimen. The absolute joint opening time histories obtained from numerical analysis were used as input ground motions for the double joint tests. The Rinaldi...
Facility: State University of New York at Buffalo, NY, United States


  Experiment-8: Buffalo - Preliminary Testing on Lined DI Pipe
Dates: November 21, 2011 - November 21, 2011
Description: Preliminary testing was conducted to find the force at which the IMain liner deboded from the ductile iron pipe or the force at which the IMain liner fractured while remaining bonded to the pipe.
Facility: State University of New York at Buffalo, NY, United States


  Experiment-9: Buffalo - Dynamic Tests of Single Joint with Joshua-Tree Ground Motions
Dates: February 17, 2012 - February 23, 2012
Description: Single-joint dynamic tests with the Joshua-Tree (J-T) ground motion were performed on both joints of the pipe specimen. The J-T ground motion has the characteristics of a far-field ground motion, which contains several spikes with different amplitudes...
Facility: State University of New York at Buffalo, NY, United States


  Experiment-10: Buffalo - Cyclic and Dynamic Tests of Single Joint with Rinaldi Ground Motions
Dates: December 05, 2011 - December 16, 2011
Description: The purpose of this experiment was to investigate the behavior of the joints under cyclic and dynamic loading. The east joint was first investigated using several cycles at constant speed and then varying rates were used to examine the influence of...
Facility: State University of New York at Buffalo, NY, United States


  Experiment-11: Cornell - Starline Lined Ductile Iron Pipe Test, Load Rate Sensitivity Test
Dates: December 20, 2012 - May 09, 2013
Description: This report presents the results of a large-scale axial pull tests on lined ductile iron (DI) pipe connected with bell-spigot joints. The purpose of these tests was to a) determine the capacity of the Starline 2000 liner, b) determine if the rate of...
Facility: Cornell University, NY, United States


  Experiment-12: Cornell - Starline Lined Ductile Iron Pipe Test, Pipe Centered
Dates: June 13, 2013 - June 13, 2013
Description: This report presents the results of a large-scale test on lined ductile iron (DI) pipeline connected with bell-spigot joints. This test was the first of two companion tests using StarlineA?2000 pipeline lining material. The primary purpose of this test...
Facility: Cornell University, NY, United States


  Experiment-13: Cornell - Starline Lined Ductile Iron Pipe Test, Joint Centered, Unpressurized
Dates: June 28, 2013 - June 28, 2013
Description: This report presents the results of a large-scale test on lined ductile iron (DI) pipeline connected with bell-spigot joints. This test was the second of series of companion tests using StarlineA?2000 pipeline lining material, also referred to as Starline...
Facility: Cornell University, NY, United States


  Experiment-14: Buffalo - Monotonic Tensile Tests of Single Joint
Dates: February 22, 2013 - February 26, 2013
Description: Two monotonic tensile tests were performed on the two joints of pipeline specimen SP1 using the west shake table in SEESL at UB. Before the tests, camera inspections were performed to investigate the initial condition of the bond between the liner and...
Facility: State University of New York at Buffalo, NY, United States


  Experiment-15: Buffalo - Cyclic Tensile Tests of Single Joint
Dates: March 01, 2013 - March 06, 2013
Description: The objective of this test series is to investigate the behavior of the liner-strengthened joints subjected cyclic tensile loads under different internal water pressures: normal pipeline working pressure of 48 psi and lower pipeline working pressure...
Facility: State University of New York at Buffalo, NY, United States


  Experiment-16: Buffalo - Single Joint Seismic Testing with Rinaldi and Joshua-Tree Ground Motions
Dates: March 13, 2013 - March 19, 2013
Description: The objective of this test series is to evaluate the seismic behaviors of the push-on joint after retrofit with StarlineA? 2000 liner under different type of ground motions and investigate the different behavior of the liner under dynamic loadings in...
Facility: State University of New York at Buffalo, NY, United States


  Experiment-17: Buffalo - Double Joint Seismic Tests with Rinaldi Ground Motion
Dates: March 22, 2013 - March 22, 2013
Description: The relative joint opening time histories under Rinaldi ground motions obtained from the numerical analysis at Cornell University were used as the input ground motion for the double-joint tests. The Rinaldi ground motions scaled to eight different amplitudes...
Facility: State University of New York at Buffalo, NY, United States


  Experiment-18: Cornell - Starline Lined Ductile Iron Pipe Test, Joint Centered, Pressurized
Dates: July 17, 2013 - July 17, 2013
Description: This report presents the results of a large-scale test on lined ductile iron (DI) pipeline connected with bell-spigot joints. This test was the third of series of companion tests using StarlineA?2000 pipeline lining material, also referred to as Starline...
Facility: Cornell University, NY, United States


  Experiment-19: Buffalo - Single Joint Cyclic Tensile Tests with Different Loading Rates
Dates: November 25, 2013 - December 04, 2013
Description: Two sets of cyclic tensile tests with constant internal water pressure of 48 psi and 0 psi were performed on the Specimin 5 (SP5) East Joint (EJ) and West Joint (WJ), respectively. The objective of this test series was to investigate the influence of...
Facility: State University of New York at Buffalo, NY, United States


  Experiment-20: Buffalo - Single-Joint Seismic Tests of Pre-conditioned Joint with Rinaldi Ground Motion
Dates: November 25, 2013 - December 04, 2013
Description: The objective of this test series was to investigate the seismic performance of the joint reinforced with StarlineA? 2000 liner after preconditioning. The two joints of pipeline specimen SP5, previously tested under cyclic tensile loading with different...
Facility: State University of New York at Buffalo, NY, United States
Start Prev 1 Next End
Display Num Results 1 - 20 of 20